SATO CL4NX Operator's Manual page 141

SNMP
Interface > Network > Services > SNMP
Set the functions for SNMP.
The SNMP function enables you to monitor and manage a UDP/IP based
network.
The setting items are as follows:
1 sysContact
2 sysName
3 sysLocation
4 prtMarkerCounter
Unit
5 Agent
6 Traps
sysContact
Interface > Network > Services > SNMP > sysContact
Set the contact information.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 255 characters.
sysName
Interface > Network > Services > SNMP > sysName
Set the name information.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 255 characters.
Set the contact information.
Set the name information.
Set the location information.
Set the unit to use for reporting counter values
for subunits.
Set the Agent function.
Set the Traps function.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
139