SATO CL4NX Operator's Manual page 116

4 Operation and Configuration
Wi-Fi
Interface > Network > Settings > Wi-Fi
Set the wireless LAN.
Shows only if you have installed the optional wireless LAN.
The setting items are as follows:
1 IPv4
2 IPv6
3 Proxy
4 Wi-Fi Protected
Setup
5 Wi-Fi Direct
6 SSID
7 Hidden SSID
8 Mode
9 Channel
10 Security
11 WEP Conf.
12 WPA Conf.
13 EAP Conf.
CAUTION
After doing the settings, press the right soft button to enable the new
settings. Press the left soft button to cancel the new settings and return to
the previous settings.
Note
When Wi-Fi Direct is active, IPv6 and Wi-Fi Protected Setup are not
shown on the screen.
114
CL4NX/CL6NX Operator Manual
Configure IPv4 for Wi-Fi.
Configure IPv6 for Wi-Fi.
Configure the proxy for Wi-Fi.
Set the wireless LAN connection with the Wi-Fi
Protected Setup (WPS) function.
Set the Wi-Fi Direct function.
*Enabled only if you have selected
Infrastructure in the Mode menu.
Set the SSID.
Set the Hidden SSID.
*Show only if you have selected Infrastructure
in the Mode menu.
Set the communication mode.
Set the communication channel.
Set the security (encryption method).
Set the WEP key.
*Shows only if you have selected WEP in the
Security menu.
Set the WPA authentication
*Shows only if you have selected
or WPA2 in the Security menu.
Set the EAP authentication.
*Shows only if you have selected Dynamic
WEP in the Security menu.
.
WPA+WPA2