SATO CL4NX Operator's Manual page 230

4 Operation and Configuration
Settings
Tools > Reset > Select > Settings
Select the setting items to be initialized.
The options are as follows:
• User Reset: Initialize the setting values.
• User Reset (-Interface): Initialize the setting values that are not
included in the Interface menu.
• Factory Reset: Initialize to the status after factory shipment.
• Factory Reset (-Interface): Initialize the items that are not included in
the Interface menu to the status after factory shipment.
• Interface: Initialize the setting values in the Interface menu.
• Printing: Initialize the setting values in the Printing menu.
Select the item to be initialized using the
right soft button to perform the initialization.
The confirmation screen shows.
Press the left soft button to cancel or right soft button to perform the
initialization.
If the message prompting to restart the printer appears on the online/offline
screen, reboot the printer to make the setting effective.
Refer to Section 7.1 List of Initial Values
setting item.
Profiles
Tools > Profiles
Maintain the customized profile of the printer configurations.
The name of the last loaded profile is shown in the parenthesis.
The setting items are as follows:
1 Delete
2 Load
3 Save
4 Start with
228
CL4NX/CL6NX Operator Manual
/ buttons, then press the
for the initial value of each
Delete the profile of the printer.
*Not available if no profile is saved.
Load the profile of the printer.
*Not available if no profile is saved.
Save the current printer configurations as a
new profile.
Select the profile to load at printer startup.
*Not available if no profile is saved.