SATO CL4NX Operator's Manual page 102

4 Operation and Configuration
Offset
Printing > Advanced > Adjustments > Offset
Correct the offset position.
Offset adjusts the backfeed/stop position for Tear-off/Cut/Dispense
operation.
Set the offset value '+' to move the stop position opposite the feed direction
and value '-' to move the stop position in the feed direction.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
<CL4NX>
• 203 dpi: -30 to 0 to 30 dots
• 305 dpi: -45 to 0 to 45 dots
• 609 dpi: -90 to 0 to 90 dots
<CL6NX>
• 203 dpi: -30 to 0 to 30 dots
• 305 dpi: -45 to 0 to 45 dots
Pitch
Printing > Advanced > Adjustments > Pitch
Pitch adjusts the leading edge of media position thus effects the vertical
print position placement.
Set the offset value '+' to move the print position opposite the feed
direction and value '-' to move the print position in the feed direction.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
<CL4NX>
• 203 dpi: -30 to 0 to 30 dots
• 305 dpi: -45 to 0 to 45 dots
• 609 dpi: -90 to 0 to 90 dots
<CL6NX>
• 203 dpi: -30 to 0 to 30 dots
• 305 dpi: -45 to 0 to 45 dots
100
CL4NX/CL6NX Operator Manual
+V
-V