SATO CL4NX Operator's Manual page 259

2
Open the top cover.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3
Push the head lock lever q towards the
rear to unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
4
Remove the media and ribbon if they are
already loaded.
Refer to Section 3.3 Removing the Ribbon
the reverse procedure in
Media.
5
Clean the dirt on the print head w,
platen roller e and ribbon roller r
using a cleaning pen or a cotton swab
dabbed with cleaning liquid.
and
Section 3.5 Loading
5 Cleaning and Performing Printer Adjustments
CL4NX/CL6NX Operator Manual
1
4
2
3
257