SATO CL4NX Operator's Manual page 210

4 Operation and Configuration
Notifications
System > Notifications
Set the function to notify the timing of cleaning and parts replacement.
The setting items are as follows:
1 Clean Printhead
2 Change Printhead
3 Change Cutter
4 Change Platen
Clean Printhead
System > Notifications > Clean Printhead
Notify when the print head needs to be cleaned.
The setting items are as follows:
1 Clean Printhead
2 Cleaning Interval
3 Clean Counter
Clean Printhead
System > Notifications > Clean Printhead > Clean Printhead
Enable or disable the notification function about when the print head needs
to be cleaned.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
208
CL4NX/CL6NX Operator Manual
Notify when the print head needs to be
cleaned.
Notify when the print head needs to be
replaced.
Notify when the cutter unit needs to be
replaced.
Notify when the platen roller needs to be
replaced.
Enable or disable the notification function about
when the print head needs to be cleaned.
Set the notification interval about when the print
head needs to be cleaned.
Shows the current print distance.