SATO CL4NX Operator's Manual page 216

4 Operation and Configuration
Install Security
System > Password > Install Security
Enable or disable the password input for installing the pkg file to the
printer.
If you have enabled the password input, the printer requires you to enter
the password set in the Password screen before you can download the
package file.
The options are as follows:
• Disabled: No password is required to install a pkg file.
• USB: Password is required to install a pkg file from the USB memory.
• Always: Password is required to install a pkg file from the USB memory
or downloaded from computer.
Note
The password used for installing a pkg file can be any passwords set in the
System > Password.
Contact a SATO reseller or technical service center for more information of
the pkg file.
NFC Security
System > Password > NFC Security
Set whether to show the confirmation message or enable the password
input before settings are written to the printer from an Android device with
the NFC interface.
To use the NFC Security function, the settings must be written from the
Android device while the printer is powered off. The confirmation message
or password input screen is shown when the printer is powered on.
The options are as follows:
• None: No confirmation message is shown and no password is required
before the settings are written to the printer.
• Confirm: The confirmation message is shown before the settings are
written to the printer.
• Password: You need to enter the password set in the Password
screen before the settings are written to the printer.
214
CL4NX/CL6NX Operator Manual