SATO CL4NX Operator's Manual page 163

Ignore CR/LF
Interface > Ignore CR/LF
Set whether to ignore the CR/LF code (0x0D 0x0A) in the received data.
The options are as follows:
• Enabled: Ignore the CR/LF code.
• Disabled: Do not ignore the CR/LF code.
Ignore CAN/DLE
Interface > Ignore CAN/DLE
Set whether to ignore the CAN/DLE code (0x10 / 0x18) in the received
data.
The options are as follows:
• Enabled: Ignore the CAN/DLE code.
• Disabled: Do not ignore the CAN/DLE code.
External I/O
Interface > External I/O
Use the external (EXT) terminal as an interface between the external
device and the printer.
Shows only if the combo interface board is installed.
The setting items are as follows:
1 Enable
2 Signals
3 EXT I/O Re-print
Enable or disable the external signal interface.
Set the external signal.
*Shows only if you have selected Enabled in
the Enable menu.
Set the reprint function that uses the external
terminal.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
161