SATO CL4NX Operator's Manual page 215

Show Total Count
System > Show Total Count
Enable or disable the indication of the total print count.
If set to Enabled, the total print count shows on both the Online and Offline
screens.
The number in the brackets to the right of "QTY" on the Online and Offline
screens is the total print count.
The options are as follows:
• Enabled: Enable the indication of the total print count.
• Disabled: Disable the indication of the total print count.
Note
Shows the total print count from the time the printer is on until it is off.
When you power off the printer, the count resets to 0.
Password
System > Password
The setting items are as follows:
1 Password Enable
2 Install Security
3 NFC Security
4 Change Password
Password Enable
System > Password > Password Enable
Enable or disable the password setting.
If you have set the password to Enabled, the printer requires you to enter
the password set in the Password screen before you enter the Settings
menu.
The options are as follows:
• Enabled: Enable the password setting.
• Disabled: Disable the password setting.
Note
The default password is 0310. You can change the password in Password
> Change Password > level1.
Enable or disable the password setting.
Enable or disable the password input for the
package file download.
Set whether to show the confirmation message
or enable the password input before settings
are written to the printer from an Android device
with the NFC interface.
Change the password.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
213