4 Operation and Configuration
Code Type
Applications > SDPL > Control Code > Code Type
Set the control code type.
The options are as follows:
• Standard
• Alternate 1
• Alternate 2
• Custom
SOH
Applications > SDPL > Control Code > SOH
Set the SOH code.
You can change the code only if you have selected Custom in the Code
Type menu.
The setting range is from 00 to ff (hexadecimal).
STX
Applications > SDPL > Control Code > STX
Set the STX code.
You can change the code only if you have selected Custom in the Code
Type menu.
The setting range is from 00 to ff (hexadecimal).
CR
Applications > SDPL > Control Code > CR
Set the CR code.
You can change the code only if you have selected Custom in the Code
Type menu.
The setting range is from 00 to ff (hexadecimal).
194
CL4NX/CL6NX Operator Manual