SATO CL4NX Operator's Manual page 135

Port2
Interface > Network > Services > Ports > Port2
Set the port number.
The setting range is from 1 to 65535.
Each port (1, 2 and 3) must be set to different values.
Note
This setting is disabled when AEP mode is enabled.
Port3
Interface > Network > Services > Ports > Port3
Set the port number.
The setting range is from 1 to 65535.
Each port (1, 2 and 3) must be set to different values.
Note
You can change the return status format of port3 to legacy status by enabling
Legacy Status for Port 9100.
Flow Control
Interface > Network > Services > Ports > Flow Control
Set the communication protocol.
The options are as follows:
• Status4
• Status4 ENQ
• Status3
• Status5
• None
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
133