SATO CL4NX Operator's Manual page 239

Clone
Tools > Clone
Copy the current printer settings and installed data to the USB memory.
Available only if you have installed the USB memory.
Use the clone configuration when the printer will be replaced with a new
printer, or when you set up multiple printers with same settings.
The options are as follows:
• Excl. LAN/Wi-Fi/IP: Copy the printer settings and data, excluding
network information, to the USB memory. This is useful when you set
up multiple printers already configured for network with the same
printer settings.
• Incl. LAN/Wi-Fi: Copy the printer settings and data, including network
information (excluding the IP address), to the USB memory. This is
useful when you set up multiple printers to be connected to the same
network with the same printer settings.
• Incl. LAN/Wi-Fi/IP: Copy the printer settings and data, including
network information (with the IP address), to the USB memory. This is
useful when carrying over the settings of the printer to be replaced to a
new printer.
CAUTION
Be sure to perform a virus check for the USB memory before connecting it
to the printer. SATO Corporation shall not be held responsible for any
printer malfunctions caused by a virus spread via USB memory.
Startup Guide
Tools > Startup Guide
Enable or disable the startup guide.
The options are as follows:
• Enabled: Enable the startup guide.
• Disabled: Disable the startup guide.
If you have selected Enabled in the Startup Guide menu, the startup
guide shows the next time you power on the printer.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
237