4 Operation and Configuration
Auto-mode
Printing > Auto-mode
When using Auto-mode, the print mode changes automatically according
to the status of the installed option unit.
The options are as follows:
• Enabled: The print mode changes automatically.
• Disabled: The print mode changes according to the setting of the Print
Mode.
Operate in cutter mode if you have installed the optional cutter unit.
Operate in dispenser mode if you have installed the optional dispenser
unit.
Operate in linerless mode if you have installed the optional linerless cutter
kit (CL4NX only).
88
CL4NX/CL6NX Operator Manual