SATO CL4NX Operator's Manual page 137

Legacy Status for Port 9100
Interface > Network > Services > Ports > Legacy Status for Port 9100
Set whether to change the return status format of port3 to legacy status.
Does not show if you have selected None in the Flow Control menu.
The options are as follows:
• Enabled: Change the return status format of port3 to legacy status.
• Disabled: Do not change the return status format of port3 to legacy
status.
In legacy status, the return status format of port3 becomes as follows:
Status Legacy status
Status3 Disabled
Enabled
Status4 Disabled
Enabled
Status5 Disabled
Enabled
ACK/NAK Reply
ACK/NAK
1 byte
Status Reply
STX Status3
ACK/NAK Reply
ACK/NAK 1 byte
Status Reply
00 00 00 0b STX Status3
ACK/NAK Reply
00 00 00 01 ACK/NAK 5 bytes
Status Reply
00 00 00 1C ENQ STX
ACK/NAK Reply
ACK/NAK 1 byte
Status Reply
00 00 00 20 00 00 00 1C ENQ
ACK/NAK Reply
No Reply
Status Reply
STX Status5 ETX
ACK/NAK Reply
No Reply
Status Reply
00 00 00 16 STX Status5
4 Operation and Configuration
Data format
ETX 11 bytes
ETX 15 bytes
Status4 ETX 32 bytes
STX Status4
22 bytes
ETX 26 bytes
CL4NX/CL6NX Operator Manual
ETX
36 bytes
135