SATO CL4NX Operator's Manual page 133

PAC Auto Provisioning
Interface > Network > Settings > Wi-Fi > EAP Conf. > PAC Auto
Provisioning
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. >
PAC Auto Provisioning
Enable or disable PAC Auto Provisioning.
Shows only if you have selected FAST in the EAP Mode menu.
The options are as follows:
• Enabled: Enable PAC Auto Provisioning.
• Disabled: Disable PAC Auto Provisioning.
PAC P/W
Interface > Network > Settings > Wi-Fi > EAP Conf. > PAC P/W
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. >
PAC P/W
Set the PAC password.
Shows only if you have selected FAST in the EAP Mode menu and if you
have selected Disabled in the PAC Auto Provisioning.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 64 characters.
Interface
Interface > Network > Settings > Interface
Select the network interface.
This item is to select the network interface from LAN or wireless LAN when
you have installed the optional wireless LAN.
The options are as follows:
• Auto: Automatically select between LAN and wireless LAN interface at
printer startup. LAN is selected if LAN cable is connected to a
link established hub (Link LED is flashing) at printer startup.
Wireless LAN is selected if LAN is not detected at printer
startup.
• LAN: Use LAN interface (or Force LAN interface).
• Wi-Fi: Use wireless LAN interface (or Force wireless LAN interface).
Shows only if you have installed the optional wireless LAN.
Note
The message prompting to restart the printer will appear on the online/
offline screen if you have made any changes. In such a case, reboot the
printer to make the setting effective.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
131