SATO CL4NX Operator's Manual page 170

4 Operation and Configuration
Antenna Pitch
Interface > RFID > Antenna Pitch
Set the antenna pitch according to the Inlay Configuration Guide.
For details, access the following URL:
http://www.satoworldwide.com/rfid/
The options are as follows:
• Standard
• Short
*Shows only if the module is UHF.
Write Power
Interface > RFID > Write Power
Set radio power level used to write information to RFID tag according to
the Inlay Configuration Guide. For details, access the following URL:
http://www.satoworldwide.com/rfid/
The setting range is from 0 to 24 dBm.
*Shows only if the module is UHF.
Read Power
Interface > RFID > Read Power
Set radio power level used to read information from RFID tag according to
the Inlay Configuration Guide. For details, access the following URL:
http://www.satoworldwide.com/rfid/
The setting range is from 0 to 24 dBm.
*Shows only if the module is UHF.
Tag Offset
Interface > RFID > Tag Offset
Set distance to print on label BEFORE pausing to encode RFID according
to the Inlay Configuration Guide. This setting will be used when labels
are not compatible with the CL4NX's antenna positions. For details,
access the following URL:
http://www.satoworldwide.com/rfid/
The setting range is from 0 to 240 mm.
168
CL4NX/CL6NX Operator Manual
U
HF
U
HF
U
HF
U H
HF F