SATO CL4NX Operator's Manual page 176

4 Operation and Configuration
Non-RFID Warning
Interface > RFID > Non-RFID Warning
Set the warning for non-RFID error.
The options are as follows:
• Enabled: Show the non-RFID warning upon error.
• Disabled: Ignore the non-RFID error.
With Non-RFID warning enabled and RFID tag loaded, if the items
received do not contain an RFID issue command, a warning error shows
before printing so that the RFID tag will not be wasted.
Press the left soft button (CANCEL) to clear the warning message.
Log RFID Data
Interface > RFID > Log RFID Data
Set the log function to record the encoded tag information.
The log data can record up to 100 tags of information.
The options are as follows:
• Enabled: Enable the log function to record the RFID data.
• Disabled: Disable the log function to record the RFID data.
Note
UID data is recorded if the module is HF.
Data To Record
Interface > RFID > Data To Record
Set the data to record the log when Log RFID Data is enabled.
The options are as follows:
• EPC and TID: Store the EPC and TID data.
• EPC: Store the EPC data.
• TID: Store the TID data.
* Shows only if the module is UHF.
174
CL4NX/CL6NX Operator Manual
U H
HF F
U H
HF F
U
HF