SATO CL4NX Operator's Manual page 127

Channel
Interface > Network > Settings > Wi-Fi > Channel
Set the communication channel.
Channel can be set only if you have selected Ad-hoc in the Mode menu.
The number of channels you can set varies depending on the region of the
printer.
Security
Interface > Network > Settings > Wi-Fi > Security
Set the security method of the network. Set the security methods so that
the printer, host and network devices match.
The options are as follows:
• None
• WEP
• WPA+WPA2
• WPA2
• Dynamic WEP
If you have selected Ad-hoc in the Mode menu, only None and WEP will
be available in the Security menu.
WEP Conf.
Interface > Network > Settings > Wi-Fi > WEP Conf.
Set the WEP key.
Shows only if you have selected WEP in the Security menu.
The setting items are as follows:
1 Authentication
2 Key Index
3 Key #1 - Key #4
Authentication
Interface > Network > Settings > Wi-Fi > WEP Conf. > Authentication
Set the WEP authentication method.
The options are as follows:
• Open System
• Shared Key
Set the WEP authentication method.
Set the key index.
Set the WEP key1 - key4.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
125