SATO CL4NX Operator's Manual page 203

SEPL
Applications > SEPL
To use SEPL as a printer command, set the following items:
1 Home Reference
2 Memory Device
3 Sim. 300 DPI
Head
Home Reference
Applications > SEPL > Home Reference
Adjust the print reference position by specifying the offset position in the
horizontal and vertical directions.
The setting items are as follows:
1 Horz. Offset
2 Vert. Offset
Horz. Offset
Applications > SEPL > Home Reference > Horz. Offset
Specify the offset position in the horizontal direction.
The setting range is from 0 to 400 dots.
Adjust the print reference position by specifying
the offset position in the horizontal and vertical
directions.
Select the printer's memory space in which to
store forms, graphics and fonts.
When you are using the printer with 305 dpi
resolution, enable or disable 300 dpi simulation
mode.
Specify the offset position in the horizontal
direction.
Specify the offset position in the vertical
direction.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
201