SATO CL4NX Operator's Manual page 164

4 Operation and Configuration
Enable
Interface > External I/O > Enable
Enable or disable the external signal interface.
The options are as follows:
• Enabled: Enable the external signal interface.
• Disabled: Disable the external signal interface.
Signals
Interface > External I/O > Signals
Set the external signal.
Shows only if you have selected Enabled in the Enable menu.
The setting items are as follows:
1 EXT 9PIN
2 EXT Mode
3 Inputs
4 Outputs
EXT 9PIN
Interface > External I/O > Signals > EXT 9PIN
Set the function of the EXT 9PIN output.
The options are as follows:
• MODE1: The output signal becomes "Active" only when there is data in
print buffer and printer is ONLINE.
• MODE2: The output signal becomes "Active" when printer is ONLINE
regardless of print data in buffer.
162
CL4NX/CL6NX Operator Manual
Set the function of the EXT 9PIN output.
Set the mode of the Print End Signal.
Set the input pin No. of the Signal Print Start/
Signal Reprint.
Set the output pin No. of the signals.