SATO CL4NX Operator's Manual page 42

3 Loading the Ribbon and Media
5
From the ribbon supply spindle t, pass
the ribbon below the print head y.
6
Wind the ribbon counterclockwise to the
ribbon rewind spindle w and grip sheet
u.
Turn the ribbon rewind spindle counterclockwise for
several rounds, to wind the ribbon.
7
If the media is already loaded, press the
print head down until the head lock lever
is locked.
If the media is not loaded, continue with
Loading Media.
8
Close the top cover.
40
CL4NX/CL6NX Operator Manual
7
2
7
2
Section 3.5
5
6