Web Configuration; Dashboard - SATO CL4NX Operator's Manual

4 Operation and Configuration

4.5 Web Configuration

The printer can be operated through a web configuration page using any browser.
With an Ethernet LAN or WLAN connection, users can remotely get information from the printer or
perform the printer configuration.
You need the printer IP address to access the web configuration page. Refer to
Information Menu
If the printer IP address is 192.168.143.123, open up browser and enter the following URL:
https://192.168.143.123
When a security certificate is prompted, you must acknowledge and click Continue.
The web configuration page will be shown as follows.
On the upper right of each page, the model name, current resolution and MAC address are shown.
4.5.1

Dashboard

The Dashboard, which consists of smaller sections, is the default page of WebConfig. Each section
shows specific information or status of the printer.
You can view Dashboard and Certificates pages without logging in.
However, login is required to view Settings and Tools pages.
Printer Status shows the current
state (online, offline error) and
current status icons.
248
CL4NX/CL6NX Operator Manual
for the printer IP address.
Printing shows the print speed,
darkness, sensor, print mode and
backfeed setting.
Network shows the
current IP address
and MAC address of
the active interface.
Device shows the model, current
resolution and options that are
installed.
System shows the
current firmware
version, uptime, SNMP
contact, name and
location.
Section 4.4.7
This information are
shown only if Wi-Fi is
available and active.
Wi-Fi Strength is not
shown if the printer is
P2P GO.