SATO CL4NX Operator's Manual page 235

Mode
Tools > Barcode Checker > Settings > Mode
Select the check mode or disable the barcode check function.
The options are as follows:
• Disabled: Disable the barcode check function.
• Readable: Check if the printed barcodes are readable.
• Comparison: Check if the read results of the printed barcodes match
the barcode data in the print data.
Start Position
Tools > Barcode Checker > Settings > Start Position
Adjust the position at which the barcode check starts (position of the
barcode checker at which reading starts).
The barcode checker starts reading each media after the specified length
passes from the printing start position.
This setting can be used to exclude first barcode(s) from the check target
when multiple barcodes are printed on each media.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
<CL4NX>
• 203 dpi: 10 to 20000 dots
• 305 dpi: 15 to 18000 dots
• 609 dpi: 30 to 9600 dots
<CL6NX>
• 203 dpi: 10 to 20000 dots
• 305 dpi: 15 to 18000 dots
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
233