Error Icon - SATO CL4NX Operator's Manual

4.1.3

Error Icon

When a printer error occurs, the error status shows on the screen with an icon.
When an error occurs, you can perform the following operations:
• Change to offline mode.
• Cancel the error.
• Feed the media.
• Change to settings mode.
• Change to guidance video.
Note
The available operations vary, depending on the situation.
Error Icon
Clears the error if allowed
for the active error.
Change to offline mode if
allowed for the active
error.
• Error Icon
Icon
Paper end is detected.
Ribbon end is detected.
4 Operation and Configuration
Error number
Selection area
Feed the media if allowed for
the active error.
Change to settings mode or
guidance video.
Description
CL4NX/CL6NX Operator Manual
55