SATO CL4NX Operator's Manual page 346

7 Appendix
9
Press the right soft button to start reading
the barcodes.
If reading is successful, the barcode type and data
read are displayed on the screen. Only the first 23
bytes of data are displayed.
If reading is unsuccessful, or the displayed results
of the read are not correct, adjust the position of
the barcode checker by using the barcode
checker stand. For details on how to use the
barcode checker stand, refer to the Barcode
Checker Stand Kit Installation Manual that came
with the barcode checker stand kit.
Note
If the printer cannot detect the barcode checker, check if the operational settings for the barcode checker are
appropriate.
344
CL4NX/CL6NX Operator Manual