SATO CL4NX Operator's Manual page 150

4 Operation and Configuration
Enable
Interface > Network > Services > SNMP > Traps > Enable
Enable or disable the functions for Traps.
The options are as follows:
• Enabled: Enable the Traps function.
• Disabled: Disable the Traps function.
SNMP Version
Interface > Network > Services > SNMP > Traps > SNMP Version
Set the SNMP version.
The options are as follows:
• 1
• 2c
• 3
IP Version
Interface > Network > Services > SNMP > Traps > IP Version
Set the IP version to use for trap destinations.
The options are as follows:
• 4: Set the IP version to IPv4.
• 6: Set the IP version to IPv6.
Destinations
Interface > Network > Services > SNMP > Traps > Destinations
Set the number of trap destinations.
The setting range is from 1 to 3.
148
CL4NX/CL6NX Operator Manual