SATO CL4NX Operator's Manual page 338

7 Appendix
Item
Usable Media
Media width
Sizes
Media
Pitch
Usable Media
Types
336
CL4NX/CL6NX Operator Manual
Same as the printer specifications.
The minimum size is different from the printer specifications.
Continuous mode:
• 203 dpi: 20 to 2497 mm (0.79" to 98.30")
(with liner: 23 to 2500 mm (0.90" to 98.42"))
• 305 dpi: 20 to 1497 mm (0.79" to 58.94")
(with liner: 23 to 1500 mm (0.90" to 59.05"))
• 609 dpi (CL4NX only): 20 to 397 mm (0.79" to 15.63")
(with liner: 23 to 400 mm (0.90" to 15.75"))
Cutter mode (cutting every label):
• 203 dpi: 35 to 2497 mm (1.38" to 98.30")
(with liner: 38 to 2500 mm (1.50" to 98.42"))
• 305 dpi: 35 to 1497 mm (1.38" to 58.94")
(with liner: 38 to 1500 mm (1.50" to 59.05"))
• 609 dpi (CL4NX only): 35 to 397 mm (1.38" to 15.63")
(with liner: 38 to 400 mm (1.50" to 15.75"))
Cutter (cutting according to the specified number of labels)/Cut & Print mode:
• 203 dpi: 54 to 2497 mm (2.13" to 98.30")
(with liner: 57 to 2500 mm (2.24" to 98.42"))
• 305 dpi: 54 to 1497 mm (2.13" to 58.94")
(with liner: 57 to 1500 mm (2.24" to 59.05"))
• 609 dpi (CL4NX only): 54 to 397 mm (2.13" to 15.63")
(with liner: 57 to 400 mm (2.24" to 15.75"))
Dispenser mode:
• 27 to 397 mm (1.06" to 15.63") (with liner: 30 to 400 mm (1.18" to 15.75"))
Linerless mode (CL4NX only):
• 38 to 120 mm (1.50" to 4.72")
Same as the printer specifications. If the label color is silver or laminated, however,
it makes it difficult for the barcode checker to read the barcode, as the light of the
barcode checker may cause a reflection on the label surface. Be sure to do a test
read carefully in advance.
Specification