SATO CL4NX Operator's Manual page 357

Model
Media (Use genuine media made by SATO.)
Size
Dispenser
Pitch 27 to 397 mm (1.06" to 15.63")
(With Liner) 30 to 400 mm (1.18" to 15.75")
Width 22 to 128 mm (0.87" to 5.04")
(With Liner) 25 to 131 mm (0.98" to 5.16")
Diameter of Maximum 120 mm (4.72")
Liner Winding
Linerless
Pitch 30 to 120 mm (1.18" to 4.72")
Width 60 to 118 mm (2.36" to 4.65")
Roll Diameter Maximum 220 mm (8.66")
(Media Roll) When using a dispenser with liner rewinder: maximum 220 mm (8.66")
Core Diameter 76 mm, 101 mm (3", 4")
(Media Roll) When using a dispenser with liner rewinder: 76 mm (3")
* Recommend to use 4" core for thick paper (more than 150 μm), non-adhesive
Height Maximum 200 mm (7.87")
(Fan-fold Media) * When the printer and media are configured to the same height.
Thickness 0.06 to 0.268 mm (0.0024" to 0.011")
* Above pitch and width are valid for die-cut labels. For media without liner like tags, refer to the value 'with
liner'.
Note
The usable media sizes, the print speed and print quality vary depending on the media specification, media
and ribbon combination, printer settings and printing environment. It is recommended to perform a test print
with the media and ribbon to be used in advance.
CL4NX
media and RFID tags (CL4NX only)/labels.
CL6NX
47 to 177 mm (1.85" to 6.97")
50 to 180 mm (1.97" to 7.01")
―
―
CL4NX/CL6NX Operator Manual
7 Appendix
355