SATO CL4NX Operator's Manual page 180

4 Operation and Configuration
Protocol
Applications > Protocol
Set the printer language.
The options are as follows:
• AUTO: Automatically analyze the received print data and set the printer
language. In Auto mode, the printer can change the language
after startup by receiving another language.
• SBPL: Set when you use the SBPL printer language or XML.
• SZPL: Set when you use the SZPL printer language.
• SIPL: Set when you use the SIPL printer language.
• SDPL: Set when you use the SDPL printer language.
• STCL: Set when you use the STCL printer language.
• SEPL: Set when you use the SEPL printer language.
Note (When AUTO is selected in the Protocol menu)
• When AUTO is selected, the message prompting to restart the printer will appear on the online/offline
screen. In such a case, reboot the printer to make the setting effective.
• Once the printer language is fixed, the name of the printer language will appear on the online/offline
screen. The area to show the name of the printer language will remain blank until the printer language is
finalized.
The area remains blank until the
printer language is finalized.
• Printer language is finalized with the received print data.
• Non-Standard Code is not supported. When Standard Code under SBPL in the Applications menu is
disabled, the Protocol setting will be changed to SBPL.
SBPL
Applications > SBPL
SBPL (Sato Barcode Printer Language) is the common command that
controls SATO barcode label printers.
To use SBPL as a printer command, set the following items:
1 Show Error
2 Standard Code
3 Orientation
4 Font Settings
5 Compatible
178
CL4NX/CL6NX Operator Manual
For example,
send print
data in SBPL.
Enable or disable the command error
indication.
Set the protocol code.
Set the layout for printing.
Set the font.
Set the compatible code.