SATO CL4NX Operator's Manual page 192

4 Operation and Configuration
Command Head
Applications > STCL > Command Head
Set the command head.
The setting items are as follows:
1 Control Code
2 1st Byte Code
3 2nd Byte Code
4 3rd Byte Code
Control Code
Applications > STCL > Command Head > Control Code
Set the control code.
The options are as follows:
• Auto: Perform the protocol detection automatically.
• ESC|LF|NUL
• 7B|7C|7D
• Custom: Change the first to third byte codes.
1st Byte Code
Applications > STCL > Command Head > 1st Byte Code
Set the first byte code.
You can change the code only if you have selected Custom in the Control
Code menu.
The setting range is from 0 to 255.
2nd Byte Code
Applications > STCL > Command Head > 2nd Byte Code
Set the second byte code.
You can change the code only if you have selected Custom in the Control
Code menu.
The setting range is from 0 to 255.
190
CL4NX/CL6NX Operator Manual
Set the control code.
Set the first byte code.
Set the second byte code.
Set the third byte code.