SATO CL4NX Operator's Manual page 177

Output Error Mode
Interface > RFID > Output Error Mode
Set the signal type for RFID errors.
The options are as follows:
• Pulse: Outputs a pulse as the output signal when an RFID error occurs.
• Level: Outputs a level as the output signal when an RFID error occurs.
Pulse Length
Interface > RFID > Pulse Length
Set the length of an RFID error pulse.
Shows only if you have selected Pulse in the Output Error Mode menu.
The options are as follows:
• 100 ms
• 200 ms
• 300 ms
• 400 ms
• 500 ms
Counters
Interface > RFID> Counters
Shows the RFID counter.
The display items are as follows:
1 Lifetime
2 User
Shows the number of encoding successes,
failures, and total attempts.
Shows the number of encoding successes,
failures, and total attempts after the RFID
counter is cleared.
4 Operation and Configuration
U
HF
U
HF
U
HF
CL4NX/CL6NX Operator Manual
H
F
H
F
H
F
175