SATO CL4NX Operator's Manual page 328

7 Appendix
When using a small-size label (about the size of P30 X W40 mm, for example) or not enough for setting
margin, the slash and error message are printed overlap on each other. The overlapped area are inverse
from black to white. There is no dump printing.
If not specified by the media size command <A1>, the printer prints the RFID error using a fixed size of
P30 X W40 mm. When a character overlaps with the slash, the character will inverse from black to white.
326
CL4NX/CL6NX Operator Manual
TAG NOT FOUND error in RFID
write command
(0, 0)
WRITE TAG ERROR in RFID
write command
For other errors, the printer prints
the error message accordingly.
40 mm
WRITE TAG ERROR
3031323334353637
3839414243444546
The dump is printed for
the first sixteen or
thirty-two bytes of data.
TAG NOT FOUND error in
RFID write command
40 mm
TAG NOT FOUND
3031323334353637
3839414243444546
The dump is printed for
the first sixteen or
thirty-two bytes of data.
Dotted line shows the range specified with
media size command <A1>.
Read error in UID/EPC/IDm
print command <TU> or TAG
NOT FOUND error
TAG NOT FOUND
30 mm
30 mm
40 mm
30 mm