SATO CL4NX Operator's Manual page 123

Exclude
Interface > Network > Settings > Wi-Fi > Proxy > Exclude
Set names, IP addresses or domains for the proxy to exclude.
Note
Exclude must contain at least 127.0.0.1 and localhost.
Wi-Fi Protected Setup
Interface > Network > Settings > Wi-Fi > Wi-Fi Protected Setup
Set the wireless LAN connection using the push button or PIN code
method.
The setting items are as follows:
1 Button (PBC)
2 PIN
Note
• Refer to the manual of the access point device for its operation.
• This screen does not show if LAN or Wi-Fi Direct is active.
Button (PBC)
Interface > Network > Settings > Wi-Fi > Wi-Fi Protected Setup>
Button (PBC)
Set the wireless LAN connection using the push button method.
1. Select Button (PBC) in the Wi-Fi Protected Setup menu and press
the button.
2. When Scanning... shows on the screen, press the WPS button on the
access point of the wireless LAN device.
3. When the connection to the access point is established, Successfully
configured. shows on the screen.
Set the wireless LAN connection using the
push button method.
Set the wireless LAN connection using the PIN
code method.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
121