SATO CL4NX Operator's Manual page 174

4 Operation and Configuration
Chip Manufacturer
Interface > RFID > MCS > Chip Manufacturer
Manually set MCS manufacturer prefix.
Shows only if you have selected Enabled in the MCS menu.
The options are as follows:
• IMPINJ
• ALIEN
• NXP
Pre-Encoded Tag
Interface > RFID > MCS > Pre-Encoded Tag
Enable or disable for tags with pre-encoded EPC serial numbers. EPC
GTIN data is still required.
Shows only if you have selected Enabled in the MCS menu.
The options are as follows:
• Enabled: Enable the pre-encoded tag.
• Disabled: Disable the pre-encoded tag.
Assign Prefix
Interface > RFID > MCS > Assign Prefix
Set how to assign the three digit prefix data.
Shows only if you have selected Enabled in the MCS menu.
The options are as follows:
• Auto: Set to the manufacturer prefix selected in Chip Manufacturer.
• Manual: Set to the prefix determined by the MCS Prefix Digit and Input
Prefix.
Note
Does not show if Chip Manufacturer is NXP and Pre-Encoded Tag is
enabled.
172
CL4NX/CL6NX Operator Manual
U
HF
U
HF
U
HF