Chrysler 2005 Crossfire SRT6 Service Manual page 1949

ZH
(P0106) MAP SENSOR PERFORMANCE (CONTINUED)
2.
CHECK FOR CURRENT DTC
Note: If the PCM detects and stores a DTC, the PCM also stores
the engine/vehicle operating conditions under which the DTC was
set. Some of these conditions are displayed on the DRB III at the
same time the DTC is displayed.
Note: Before erasing stored DTCs, record these conditions.
Attempting to duplicate these conditions may assist when check-
ing for an active DTC.
Turn the ignition on.
With the DRB III , erase PCM DTCs.
Note: It maybe necessary to road test the vehicle for this DTC to
set.
With the DRB III , read PCM DTCs.
Did this DTC set again?
Yes >> Go To 3
No >> Go To 20
3.
CHECK FOR CMP SENSOR, ENGINE COOLANT TEMP SENSOR, AND OIL SENSOR DTCS
With the ignition on.
With the DRB III , read PCM DTCs.
Are there CMP Sensor, Engine Coolant Temp Sensor, and Oil
Sensor DTCs present with this DTC?
Yes >> Go To 4
No >> Go To 5
ENGINE - ELECTRICAL DIAGNOSTICS 9 - 25