Cmyk Toner Add Motor Assembly Removal - Lexmark C93x Service Manual

5057-XXX

CMYK toner add motor assembly removal

1. Remove the top cover assembly. See
2. Remove the printer front door assembly. See
3. Remove the front left cover. See
4. Remove the waste toner cartridge cover. See
5. Remove the waste toner cartridge sensor assembly. See
page 4-39.
6. Remove the inner cover. See
7. Remove the three CMY toner add assemblies. See
8. Remove the K toner add assembly. See
9. Remove the main power switch actuator. See
10. Remove the two screws securing the CMYK toner add motor assembly (A) to the machine.
11. Lift the CMYK toner add motor assembly (A) slightly, and pull it towards the front of the machine.
12. Release the harnesses from the clamps.
13. Disconnect the connector from the CMYK toner add motor assembly (A).
14. Release the tabs securing the four sensors (toner RFID) to the assembly.
15. Remove the four sensors (toner RFID).
16. Remove the CMYK toner add motor assembly (A).
4-94
Printer Service Manual
"Top cover assembly removal" on page
"Printer front door assembly removal" on page
"Front left cover removal" on page
"Waste toner cartridge cover removal" on page
"Inner cover removal" on page
"CMY toner add assembly removal" on page
"K toner add assembly removal" on page
"Main power switch actuator removal" on page
4-4.
4-9.
"Waste toner cartridge sensor assembly removal" on
4-42.
4-3.
4-39.
4-46.
4-48.
4-93.