Toner Add Motor Assembly Removal - Lexmark W840 Service Manual

Toner add motor assembly removal

1.
Remove the front left cover. See
2.
Remove the top cover assembly. See
3.
Remove the PC cartridge.
4.
Remove the toner cartridge.
5.
Remove the printer front door assembly. See
6.
Remove the front inner cover. See
7.
Remove the toner cartridge guide assembly. See
page 4-95.
8.
Disconnect the connector from the toner add motor assembly (A).
9.
Remove the four screws securing the toner add motor assembly (A).
10.
Remove the toner add motor assembly (A).
Note: Before reinstalling, ensure the shaft on the toner cartridge guide assembly is inserted into the toner add
motor assembly (A).
"Printer front left cover removal" on page
"Top cover assembly removal" on page
"Front inner cover removal" on page
A
"Printer front door assembly removal" on page
"Toner cartridge guide assembly removal" on
Connector
4024-XXX
4-3.
4-8.
4-9.
4-11.
4-97
Repair information