Immobilizer Receiver - Honda NC700 2012 Service Manual

dummyhead dummyhead
IMMOBILIZER SYSTEM (HISS)
GROUND LINE INSPECTION
Check for continuity between the ECM/PCM 33P
connector [1] terminals and ground.
CONNECTION: Green/orange – Ground
TOOL:
Test probe
There should be continuity at all times.
CKP SENSOR LINE INSPECTION
Disconnect the CKP sensor 2P (Red) connector [1]
(page 23-6).
Check for continuity between the ECM/PCM 33P
connector [2] and CKP sensor 2P (Red) connector
terminals.
CONNECTION: Yellow – Yellow
TOOL:
Test probe
There should be continuity between the same color wire
terminals.

IMMOBILIZER RECEIVER

INSPECTION
Remove the shroud/side cover (NC700X/XA/XD) (page
2-14).
Remove the headlight/headlight stay (NC700S/SA/SD)
(page 2-27).
Disconnect
connector [1].
23-12
Green – Ground
07ZAJ-RDJA110
Green/orange – Green/orange
07ZAJ-RDJA110
the immobilizer receiver
[1]
G/O
Y
[1]
NC700X/XA:
4P (Black)
[1]
NC700XD:
[1]
G/O G
[2]
G/O
Y
NC700S/SA/SD:
[1]