Endpoints - Polycom realpresence 1800 Administrator's Manual

HD Video Resolutions for TIP calls are determined according to the following table:
TIP HD Video Resolution by Line Rate
Line Rate
Line Rate >=3Mbps
3Mbps > Line Rate >= 936kbps
Line Rate < 936kbps

Endpoints

1 Configure HDX endpoints to register to Lync Server.
2 Configure H.323 endpoints to register to DMA as SIP Proxy
3 Configure SIP endpoints to register to:
 DMA as SIP Proxy
 Lync Server as SIP Proxy
 CUCM as SIP Proxy
4 Configure TIP endpoints to register to:
 DMA
 CUCM
For more information on the above, see Polycom Unified Communications Deployment Guide for Cisco
Environments.
Content
Endpoint Registration and Dialing Method affect the Video and Content Sharing characteristics of the
conference as detailed below.
Video and Content
Endpoint Registration
Dialing Method
HDX to Collaboration
Server
Polycom®, Inc.
Video Resolution
HD1080p30
HD720p30
Call is dropped.
Lync
ITP /HDX
RTV Key is required for
HDX and ITP
• HD H.264 Video
• SIP P+C
• Content: XGA,5fps
• ICE
Appendix I - Polycom Open Collaboration Network (POCN)
CUCM
ITP /HDX
TIP Key is required for
HDX
• HD H.264 Video
• No Content
• ICE not supported
DMA
ITP /HDX
TIP Key is required for
HDX
• HD H.264 Video
• SIP P+C
• Content: XGA,5fps
• ICE not supported
1065