Resolution Configuration - Polycom realpresence 1800 Administrator's Manual

b Click the Video Settings tab.
c Set the Telepresence Mode to Auto/On and select the Telepresence Layout Mode.
4 Assign the New Profile to the Meeting Room. For more information see
Room.
5 Configure a Virtual Meeting Room (VMR) on the DMA.
The procedures for configuring DMA are described in detail in the Polycom Unified Communications
Deployment Guide for Cisco Environments.

Resolution Configuration

The resolution configuration dialog box is not applicable to TIP-enabled conferences as it uses fixed
settings.
Polycom®, Inc.
Appendix I - Polycom Open Collaboration Network (POCN)
Creating a New Meeting
1064