Parts Replacement Procedure; Fixing Unit; Removing The Fixing Assembly; Fixing Sleeve Unit - Canon imageRUNNERC1022 Service Manual

Chapter 10

10.4 Parts Replacement Procedure

10.4.1 Fixing Unit

10.4.1.1 Removing the Fixing Assembly

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
Points to Note At Operation
When removing the fixing assembly, perform the operation after the fixing
assembly is surely cooled. The fixing assembly just after printing may cause
burn injury.
1) Open the ADF Unit + Reader Unit [1].
2) Open the fixing cover [2].
3) Raise the control panel unit[3] forward.
[1]
4) While pressing the fixing assembly lever [1] (2 points at left and right),
remove the fixing assembly [2].
Points to Note When holding the fixing assembly
Be sure to hold the fixing assembly with three fingers or more when lifting
the fixing assembly to prevent it from falling.
10-8
[2]
[3]
F-10-5
0018-9295
[2]

10.4.2 Fixing Sleeve Unit

10.4.2.1 Before Removing the Fixing Sleeve Unit

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the fixing assembly.(page 10-8)Reference [Removing the Fix-
ing Assembly]

10.4.2.2 Removing the Fixing Sleeve Unit

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Turn the gear [1] in the direction of the arrow to the position [2].
[1]
[1]
F-10-6
0019-5848
0019-5850