Rep 11.10 Mailbox Exit Gate Cam Follower - Xerox Phaser 4600 Service Manual

REP 11.10 Mailbox Exit Gate Cam Follower

Parts List on PL 11.25 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays,
2. Separate the Mailbox from the printer,
3. Remove the left cover, REP 11.2.
4. Remove the lower Diverter Drive Assembly,
5. Remove 1 screw (plastic) that secures the cam gear.
Figure 1 Remove the cam gear
6. Remove 2 (plastic) screws that secure the mounting bracket,
4 Repairs and Adjustments
REP 11.10
WARNING
REP 11.1.
GP 14.
REP 11.7.
Figure 1.
Figure 2.
Figure 2 Remove the exit gate bracket
NOTE: Hold the cam follower spring while removing the cam follower from the Mailbox.
7. Remove 1 (plastic) screw that secures the cam follower to the Mailbox,
Figure 3 Remove the cam follower
04/2016
4-126
Figure 3.
Phaser 4600/4620/4622 Printer Service Manual
Revised