Tool; Tool-Sd Memory Backup; Tool-Ndss Link Data Clear; Tool-Dxdp All Ous - Panasonic KX-TDA200 Programming Manual

2.5.5 Tool—Simplified Voice Message—Check Current Usage

2.5 Tool

2.5.1 Tool—SD memory backup
Saves system data from the PBX to the SD memory card. Backup begins as soon as this option is chosen.
To back up system data
•
From the Tool menu, select SD memory backup.
2.5.2 Tool—NDSS Link Data Clear
Clears NDSS Link Data stored in the connected PBX. While this tool clears both monitor extension and
monitored extension data, it only clears it at the connected PBX. To clear this data at other PBXs in the network,
it is necessary to run this tool at those PBXs.
To clear the NDSS Link Data
•
From the Tool menu, select NDSS Link Data Clear.
A confirmation screen will be displayed.
•
Click OK to clear the data.
•
Click Cancel to keep the data, and close the screen.
2.5.3 Tool—DXDP All OUS
Sets the status of all DXDP/XDP extension ports to "OUS" simultaneously.
To set all DXDP/XDP ports to OUS.
1.
From the Tool menu, select DXDP All OUS.
2.
Click OK.
2.5.4 Tool—Simplified Voice Message—Delete All Recording
Deletes all voice messages recorded to SVM/ESVM cards installed in the PBX.
To delete voice messages
1.
From the Tool menu, point to Simplified Voice Message and select Delete All Recordings.
2.
Select the card from which to delete messages.
3.
Click OK.
2.5.5 Tool—Simplified Voice Message—Check Current Usage
Displays information on the voice messages stored in SVM/ESVM cards installed in the PBX. For each
message, the type of message and the associated extension are displayed.
To view SVM message status
•
From the Tool menu, point to Simplified Voice Message and select Check Current Usage.
34 PC Programming Manual Document Version 2008-11