Vau Port Assignment - Panasonic DBS 40 Operating Manual

Section 700 - Operation
Considerations

VAU Port Assignment

Operation
DBS-70-700
Technical Manuals Online! - http://www.tech-man.com
2. After the VAU answers, do one of the following:
You want to record the
first message
You want to record the
second message
You want to play the first
message
You want to
second message
Notes:
You can enter the *97 codes again to replay messages without ending
l
y o u r c a l l .
You can only record one message at a time. To record another message,
l
you must end
3. When the operation is complete, put the phone on hook.
For more information on the VAU and its operation, see Section 770,
l
"Voice Announce Unit User Guide."
CPC-B Version 5.0 or higher, CPC-A Version 3.3 and higher)
and
A digital port can now be assigned as a VAU through system programming.
In previous releases, VAUs were assigned as standard digital ports. Using the
standard digital port assignment required the installer to make the following
program changes:
Then. . .
Dial * 98 1
Wait for a beep. After the beep. record the
message.
Dial * 98 2
Wait for a beep. After the beep. record the
message.
Dial * 97 1
The VAU plays thC message.
Dial "972
play the
The VAU plays the message.
your call
and
DBS Manual-- issued 8/l/95
Chapter 2. System Features
I
2-67