Adjustment Of Double Boards Detection Sensor - Panasonic KXF-013C Operating Instructions Manual

Chapter 2 OPERATION
6-1-3

Adjustment of Double Boards Detection Sensor

double boards detection sensor
013C-PS007
013C-IL001
When the board detection sensor PH-2 at the stopper and the multi-detection
sensor (PH-4) are ON at the same time, the machine stops because it judges
the error of multi-detection.
Remove the board to press the reset switch.
Page 6-2
X
board size
1
flow direction
sensor
stopper screw
board
t1
NOTICE
Remove the screw to set them
according to the board size.
double boards detection sensor
(PH-4)
013C-PS008
013C-PS003
Section 6 CHANGING MACHINE SET UP
Adjustmentof double boards detec-
tion sensor
stopper
Adjust the position of the double
boards detection sensor which
board detection
detects if the plural boards are
sensorPH2
picked up.
Set the board to the stopper at first.
Remove the screw to adjust the
position of the double boards
detection sensor to set it larger than
a board size.
(X<board size)
The stopper screw adjusts the
height not to let the second board
flow.
board detection sensor
(PH-2)
stopper
013C-E-OMA06-A01-01