RTCP Interval
Description
Value Range
Default Value
Configuration File Reference
4.6.4.3 Jitter Buffer
Maximum Delay
Description
Value Range
Default Value
Configuration File Reference
Minimum Delay
Description
Value Range
Default Value
Configuration File Reference
Initial Delay
Description
Document Version 2011-11
Specifies the interval, in seconds, between RTCP packets.
5–65535
5
RTCP_INTVL_n (Page 157)
Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
3–50 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than [Initial Delay]
–
This value must be greater than [Minimum Delay]
–
[Initial Delay] must be greater than or equal to [Minimum
Delay]
20 (´ 10 ms)
MAX_DELAY_n (Page 158)
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
1 or 2 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to [Initial Delay]
–
This value must be less than [Maximum Delay]
–
[Maximum Delay] must be greater than [Initial Delay]
2 (´ 10 ms)
MIN_DELAY_n (Page 158)
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Section 4 Web User Interface Programming
Administrator Guide
85