Settings On The Programming Mode; Setting Features - Panasonic KX-T7625 Quick Reference Manual

T7625.book Page 9 Wednesday, January 28, 2004 5:42 PM

Setting Features

You can customize many features of your telephone as shown in the following tables.
Original settings are shown in the gray boxes. For later reference, place a check mark in
the boxes below to indicate your customized settings.
To enter the
programming mode
PROG
OR
OR
PROGRAM
program no.
Press Follow
Programming
"PROG"or
Input.
PROGRAM.
Item
Would you like to turn on the
display backlight of the KX-
T7633/KX-T7636?
(Display Backlight Selection)
How do you prefer to
receive an intercom call?
(Alternate Receiving–Ring/
Voice)
Do you prefer to receive call
waiting for outside calls?
Which type of call waiting
for intercom calls do you
prefer?
(Call Waiting Selection)
Which type of call waiting
tone do you prefer?
(Call Waiting Tone Type
Selection)

Settings on the Programming Mode

To programme
OR
AUTO DIAL
program no.
STORE
Press ENTER Follow Selection
or STORE. & Parameter.
Programming
Input
0
0 4
1
[Back light]
2
0
1
2 1
[Voice Call]
2
0
3 0
1
[C.Wait CO]
0
1
3 1
2
[C.Wait Ext]
3
0
3 2
[C.Wait Tone]
1
OR OR
AUTO DIAL
STORE
Press ENTER
or STORE.
Selection & Parameter
Yes–ON in use [Automatic]
Yes–Always ON [Always On]
No–Always OFF
[Always Off]
Ringing [Tone Call]
Directly–The party's voice is heard
without ringing. [Voice Call]
Ring only–Prohibiting the caller
switching to the voice mode.
[Voice Call Deny]
No (No tone) [CW Tone Off]
Yes (Tone) [CW Tone On]
No call [CW Tone Off]
Tone [CW Tone On]
Voice announcement through the built-in
speaker [OHCA (Announce)]
Voice announcement through the
handset [Whisper OHCA]
Tone 1
[CW Tone 1]
Tone 2 [CW Tone 2]
To exit
EXIT
OR
PROGRAM
Press
"EXIT"or
PROGRAM.
9