Appendix B - Summary Of System Commands - ADEMCO VISTA-32FB Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Event Logging
Commands
Wireless System
Commands
User Code Commands
Arming Functions
Summary of System Commands
Event Log Display = [Code] + [#] + [60] (Installer or Master Only)
Event Log Print = [Code] + [#] + [61] (Installer or Master Only)
Clear Event Log = [Code] + [#] + [62] (Installer or Master Only)
House ID Sniffer Mode = [Code] + [#] + [2] (Installer Only)
Transmitter ID Test = [Code] + [#] + [3] (Installer Only)
Go/No Go Test = [Code] + [5] (Test Key)
Add a User Code = [User Code] + [8] + [New User Number] + [New User's
Code]
Change a Code = [User Code] + [8] + [User Number] + [New User's Code]
Delete a User's Code = [User Code] + [8] + [User Number to Be Deleted] +
User Code]
View User Capability = [User Code] + [∗] + [∗]
Set Real-Time Clock (Installer, Master Only) = [Code] + [#] + [63]
Arming Away
Arming Stay
Arming Instant
Arming Maximum
Quick Arm
Global Arming
Disarming
Bypassing Zones
Quick Bypass
Chime Mode
Partition GOTO
GOTO Home Partition
Panics
View Downloaded
Messages
Display All Zone
Descriptors
Enter Code + Away [2].
Enter Code + Stay [3].
Enter Code + Instant [7].
Enter Code + Maximum [4].
Use # Key Instead of User Code Followed by Any of
the Above Arming Mode Keys.
If Enabled for the User, the Keypad Will Display a
Prompt. Answer the Prompted Questions.
Enter Code + Off [1].
Enter Code + Bypass [6] + Zone Number.
To Automatically Bypass All Faulted Zones, Use
Quick Bypass Method: Enter Code + Bypass + [#].
Enter Code + Chime [9]. To Turn Chime Mode Off,
Enter Code + Chime Again.
User Code + [∗] + Partition Number 1-2.
User Code + [∗] + 0.
[∗] + [1] Zone 95 (A Key).
[∗] + [#] Zone 99 (B Key).
[#] + [3] Zone 96 (C Key).
Press 0 for 5 Seconds.
Press [∗] for 5 Seconds.
A P P E N D I X B
B–1