Holiday Schedules - ADEMCO VISTA-32FB Installation And Setup Manual

VISTA-32FB Installation and Set-Up Guide
Hol P1 OP WIND.?
00:00 00:00
Quit ?
1 = YES 0 = NO 0

Holiday Schedules

A holiday schedule will override the regular daily open/close schedule on the programmed
holidays throughout the year.
Holiday Schedule Worksheet
The system provides up to 16 holidays that can be assigned for the system. Each holiday can
be assigned to any combination of partitions. List the desired holidays in a Month/Day
format on the worksheet. Check the partitions for which these holidays apply.
Holiday Schedule Programming
After entering Scheduling Menu Mode, press 0 until the HOLIDAYS ? prompt appears.
Holidays ?
1 Yes
HOLIDAY NUMBER ?
01-16, 00=Quit 01
01 ENTER DATE
00/00
Part ?
Hit 0-2
24–10
Repeat the procedure for the holiday opening and closing time
windows.
00
Press the [ ] key to accept the entry.
When the entries are completed, the PARTITION #? prompt is
displayed again. Repeat this procedure for each partition in
the system.
Enter 0 at the QUIT ? prompt to return to the main menu
choices and continue programming.
Enter 1 to quit Scheduling Menu Mode.
1
2
3...16
Enter 1 to program holiday schedules.
0 = No 0
Enter the 2-digit holiday number (01-16) to be programmed
and press [ ] to accept entry.
Enter 00 + [ ] at the HOLIDAY NUMBER? prompt to quit the
holiday menus and display the QUIT? prompt.
The cursor will be positioned on the tens of months digit. Enter
the appropriate month, then press [ ] to proceed to the day
field.
Enter the appropriate day for the holiday.
Press [ ] to accept the entry.
Holidays can be set for any partition, as follows. Press 0 to
1 2
turn all partitions on or off, or use keys 1-2 to toggle the letter
x x
"x" under the partition to which this holiday will apply.
Press the [ ] key when all desired partitions have been
assigned.
Partition
Month/Day 1
/
/
/
2