# 93 Menu Mode Programming - ADEMCO VISTA-32FB Installation And Setup Manual

Fire and burglary partitioned security system with scheduling
Table of Contents

Advertisement

VISTA-32FB Installation and Set-Up Guide
2. Enter a partition-specific field number (e.g., 09) to begin programming. When the first
field's entry is completed, the next partition-specific field will automatically be displayed.
When all partition-specific fields are programmed, the system returns to the global
programming fields (page 1 fields). To return to the global program fields before
finishing all fields, enter any global field number.
3. Repeat this procedure for each partition in the installation.

# 93 Menu Mode Programming

#93 Menu Mode (refer to the Quick Start Guide) is a mode through which much of the
system's programming is done. It offers main menu selections for the following:
Zone Programming.
Sequential Mode Programming.
Report Code Programming.
Alpha Programming.
Device Programming.
Relay Programming.
Relay Voice Descriptors.
Custom Index Programming (VIP Module substitute words).
Clear Serial RF.
Press 0 (NO) or 1 (YES) in response to the displayed menu selection. Pressing 0 will display
the next choice in sequence. The keypad will then prompt you with questions regarding the
programming of a particular zone or device. (Refer to #93 Menu Mode Programming section
of the Quick Start Guide to program each option shown.)
The following is a list of commands used while in the Menu Mode.
# 93 Menu Mode Key Commands:
#93
[ ]
[#]
0
1
00+[ ]
20–4
PROGRAMMING PARTITION-SPECIFIC FIELDS
Enter the partition to be programmed.
Enter a partition-specific field number and make entry.
After partition-specific fields are programmed,
press 91 to select next partition.
Enter any global field number to return to the global fields at any time.
Enters Menu Mode.
Serves as ENTER key. Press to have keypad accept entry.
Backs up to previous screen.
Press to answer NO.
Press to answer YES.
Escapes from Menu Mode, back into Data Field Programming
Mode, if entered at the first prompt of each main menu option.
Press 91 to select a partition.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents